Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
- Description
- Bulb Options
- Fitment
- Specifications
- Warranty
- Shipping & Returns
The factory incandescent turn signals on the Toyota Tacoma illuminate in a slow glow, taking a moment to turn off and on. With replacement LED bulbs, you can immediately update your vehicle with the instant on-off blinking of modern LEDs. This instant activation adds a modern and distinct look to the Tacoma.
Add our LED resistor kit a pair of 6ohm resistors and quick-splices, to slow down hyperblinking or prevent bulb-out warnings caused by LEDs. Can be used on any vehicle, but does require tapping factory signals. (Note: Resistors will get hot. Do not mount near plastic or wiring.)
Features
- Modern LED appearance with instant on and off
- Direct replacement for Toyota Tacoma front turn bulbs
- Plug and play, no modification with factory 7440 bulb size
- Multiple brightness levels available
Brightness. All Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.
Correct Color. You'll see that we only offer an amber color option, which is correct to SAE/DOT "amber" requirements. Whether you have a clear lens or an amber reflector over the turn signal bulb on your Tacoma, amber is the correct emitter color for maximum turn signal output.
Reduced Load. When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the Tacoma looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to lower power draw. This causes a "hyperblink," or fast-blinking turn signal, which can be corrected with LED Resistors or an LED Flasher.
The most basic, tried-and-true method to correct hyperblinking is to add resistors. These can be used on any vehicle, because a 6-ohm resistor uses about the same power as a standard turn signal bulb. One resistor is needed to replace each turn signal bulb.
You may have also heard of flasher relays, which is the actual module that determines flash speed. On some vehicles, it can be replaced with one that is designed for LED power levels. However, on many newer vehicles these modules cannot be replaced. If it's possible to replace the flasher on the Tacoma, you'll see one listed above. Only one flasher is needed per vehicle, for both front and rear LED turn signal conversions.
Reliability. Diode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Tacoma. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.
Experience. After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Toyota or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!
HP48 -
- 48 LEDs in omnidirectional design.
- Diffusing cover for even output and clean appearance when off.
- Molded connector with sturdy terminals.
- Cosmetic upgrade only.
- 250 lumens per bulb.
HP11 -
- Four COB type LED with a single high-power chip mounted at top.
- Full metal heatsinking for reliable operation.
- Nonpolar and CK compatible electrical design.
- 310 lumens per bulb.
XP80 -
- Sixteen high-power 5W LEDs arranged in all directions.
- Metal heatsink to maintain high output.
- Inductive constant-current drive circuit.
- 510 lumens per bulb.
- NOTE: If the turn signal bulb for your vehicle acts as a daytime running light, HP24 Switchback LED bulbs are not compatible with your vehicle.
- Bulb Size: 7440
- Application: Front Turn Signal
- Make: Toyota
- Model: Tacoma
- Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
- Flasher Setup: BCM Controlled (resistor only)
- Operating Voltage: 9-16V
- Connector(s): OEM-Size Plug and Play
We will do our best to take care of our customers no matter what, especially with a product issue. Please visit our warranty portal for quick and easy service or contact us by phone or email and speak with our customer service team.
All products have a standard 1-year warranty against defects in materials and craftsmanship. The Warranty is Limited to one (1) years from the date of sale and limited solely to the parts contained within the product's kit.
Aspire Auto Accessories products have a 3-Year warranty against defects in materials and craftsmanship. The Warranty is Limited to three (3) years from the date of sale and limited solely to the parts contained within the product's kit.
The Brite Box has a 3-Year warranty against defects in materials and craftsmanship. The Warranty is Limited to three (3) years from the date of sale and limited solely to the parts contained within the product's kit.
Shipping
We want you to get your products as soon as possible. That's why we make every effort to process and ship your order as quickly as possible. All updates will be sent directly to your email automatically. If you have an order placed and would like to track your order at anytime, please go here. Feel free to contact us by phone or email at any time to get updates from our customer service team.
To read our frequently asked questions and for more inforrmation on our shipping policy, please go here.
Returns and Exchanges
We want you to be sure you're as happy with your Aspire Auto Accessories products and other brands we offer as we are. If you are not satisfied with your purchase, you have 30 days after your purchase to return or exchange your item(s). Please use our portal to start your return or exchange. Go here to visit our portal.
To read our frequently asked questions and for more information on our return & exchange policy, please go here.
Cash Back on Every Purchase
Get rewarded every time you shop with us. Rack up your points and purchase something awesome!
Recently viewed
You may also like
Need Help Ordering?
You can contact us below and we can help you over the phone Monday-Friday (9am-5pm PST) or send us an email and we will get back to you as soon as possible.